Page 1 of 2
datagrid form edit field
Posted: Mon Nov 08, 2021 10:03 am
by drunblut
Hi,
in my datagrid form i have some editable fields. if i focus on one of these fields, the former content of the field should be cleared and the opaque of the background should be false. To delete the content works fine with
in the mousedoubleup handler of the button behavior script of my datagrid. But
Code: Select all
set the opaque of fld "myfld" of me
doesn't work. The backgroundcolor remains white. Thanks for some help.
Grets Andreas
Re: datagrid form edit field
Posted: Mon Nov 08, 2021 3:00 pm
by dunbarx
Hi.
set the opaque of fld "myfld" of me
In parlance, one can "set" a boolean. But in LiveCode, you have to go the extra mile:
Code: Select all
set the opaque of fld "myfld" of me to "true"
Craig
Re: datagrid form edit field
Posted: Mon Nov 08, 2021 3:05 pm
by drunblut
sorry the second snippet is
Code: Select all
set the opaque of fld "myfld" of me to false
Re: datagrid form edit field
Posted: Mon Nov 08, 2021 3:15 pm
by drunblut
Hi Craig,
sorry, i didn't read your reply before my last post. My second snippet is
Code: Select all
set the opaque of fld "myfld" of me to false
. But the backgroundcolor remains white.
Grets Andreas
Re: datagrid form edit field
Posted: Tue Nov 09, 2021 6:27 pm
by jacque
Is it still visibly opaque? Opacity and color are separate properties, so the color can still be white but you shouldn't see it if the field is transparent.
Re: datagrid form edit field
Posted: Fri Nov 12, 2021 11:58 am
by drunblut
Hi Jacque,
when the card opens the opaque of the datagrid form with all fields is opaque as it should be. When i focus in an editable field, the opaque of this field changes and the backgroundcolor is white, but it should remain opaque. Maybe i must try it with
Code: Select all
set the script of button "Custom Field Editor Behavior" to the script of the behavior of button "Field Editor" of stack "revDataGridLibrary"
,
but i didn't understand how to do that.
Grets Andreas
Re: datagrid form edit field
Posted: Fri Nov 12, 2021 6:08 pm
by dunbarx
drunblut
The actual fields in a dataGrid do not actually get focus. When you double click on one, and that field might be named "Col 1 0004" (you can see how this is laid out) in actuality, a "phantom" field named "datGridFieldEditor" is placed over the one you clicked on. It is that field that has focus.
The properties of that overlying field may be the source of your issues.
Craig
Re: datagrid form edit field
Posted: Fri Nov 12, 2021 6:59 pm
by stam
dunbarx wrote: ↑Fri Nov 12, 2021 6:08 pm
drunblut
The actual fields in a dataGrid do not actually get focus. When you double click on one, and that field might be named "Col 1 0004" (you can see how this is laid out) in actuality, a "phantom" field named "datGridFieldEditor" is placed over the one you clicked on. It is that field that has focus.
The properties of that overlying field may be the source of your issues.
Craig
Can you intercept the field before it's shown and change it's opacity at runtime?
Re: datagrid form edit field
Posted: Fri Nov 12, 2021 11:46 pm
by dunbarx
I have never had much luck intercepting messages generated in a DG. They are mostly trapped within that gadget. So such juicy possibilities as "focusIn", "newField" or "mouseDoubleUp", all of which are generated when one double-clicks on a DG field, are trapped inside (though visible in the message watcher) and cannot be exploited.
Maybe one could test for the presence of the "datGridFieldEditor" field? There is no doubt that before one clicks on a field in a DG, there are a certain number of fields in the DG. But after the double click, there is one additional. So the "datGridFieldEditor" field is created by that action, and deleted when the user exits.
Trevor may not want people hacking his DG. But if he is reading this, maybe he will chime in.
Craig
Re: datagrid form edit field
Posted: Sat Nov 13, 2021 12:07 am
by dunbarx
In a small DG, three rows with three columns, there are 21 fields. If I make a button somewhere, with this in its script:
Code: Select all
on mouseEenter
repeat with y = 1 to the number of flds
put the name of fld y into line y of temp
end repeat
breakpoint
end mouseEnter
The debugger shows 21 fields in temp. If I then double click, to create the the "datGridFieldEditor" field, and move the cursor into the button, that field shows up as field 19 of 22. It pops up above the three "headerLabel" fields. Maybe it always appears above those.
Anyway, it just goes to show that a DG is just a LiveCode gadget, an impressive one, and to do what the OP wants is therefore certainly possible, but not necessarily straightforward.
Craig
Re: datagrid form edit field
Posted: Sat Nov 13, 2021 12:21 am
by dunbarx
OK. I still have my 3-column/3-row DG and that button. But now in the button script:
Code: Select all
on mouseenter
repeat with y = 1 to the number of flds
put the name of fld y into line y of temp
end repeat
set the backColor of field 19 to "red"
end mouseenter
Double-click any field, and immediately move the cursor into the button. The field "datGridFieldEditor" changes to red. This is not the underlying "cell" in the DG. The red does not stick, since the field "datGridFieldEditor" does not either.
Craig
Re: datagrid form edit field
Posted: Sat Nov 13, 2021 12:27 am
by dunbarx
Getting like Richmond here with all these successive posts.
On the same setup, this in the group script:
Code: Select all
on mouseEnter
put the target
if the optionKey is down then set the backColor the target to any item of "red,green,yellow,blue"
end mouseEnter
Moving the cursor around shows the actual DG field one enters in real time. But holding the optionKey down changes color, all right, but not of the field, rather of the entire DG field area. And not if you move within the actual data area. The color only changes when I move below the data area into blank space.
So much fun...
Craig
Re: datagrid form edit field
Posted: Mon Nov 15, 2021 10:59 am
by drunblut
Hi,
thanks for your replies. I did tried
Code: Select all
set the opaque of fld "datGridFieldEditor" of me to false
That doesn't work either (object not found).
Re: datagrid form edit field
Posted: Mon Nov 15, 2021 7:08 pm
by jacque
It sounds like the data entry field is created on the fly as needed, since it isn't found when it isn't visible. A variation of Dunbar's mouseEnter handler might work. Check the name of the target and if it's "dataGridFieldEditor" then set its opaque property.
Edit: I just noticed you misspelled dataGridFieldEditor (you have datGridFieldEditor) so correcting that may fix the problem.
Re: datagrid form edit field
Posted: Mon Nov 15, 2021 7:23 pm
by dunbarx
set the opaque of fld "datGridFieldEditor" of me to false
That field is ephemeral. It is hard to pin down, because it likes very much to go away at the slightest provocation. It is the permanent underlying fields that comprise the actual DG you are interested in. But these are mollycoddled by the DG itself. For example, the following handlers ought to cause a flurry of changing colors:
Code: Select all
on mouseEnter
if the name of the target contains "Col" then
set the opaque of the target to "true"
set the backColor of the target to any item of "green,blue,yellow,red,orange"
end if
end mouseEnter
on mouseLeave
if the target contains "Col" then
set the opaque of the target to "false"
set the backColor of the target to ""
end if
end mouseLeave
But it does not (though it would with a bunch of controls just sitting on the card) because those messages are already trapped within the group, and not passed along. You might hack the DG, and add a "pass" command. Is it worth it?
Just to see. try this in the msg box:
Code: Select all
set the opaque of fld "Col 1 0001" to "true"
set the backColor of fld "Col 1 0001" to any item of "green,blue,yellow,red,orange"
But now you have to already know the field of interest.
Craig