HyperStudio Stack Scope
Moderators: Klaus, FourthWorld, heatherlaine, robinmiller
-
richmond62
- Livecode Opensource Backer

- Posts: 10529
- Joined: Fri Feb 19, 2010 10:17 am
Re: HyperStudio Stack Scope
Using the HS Demo 5.2 I was able to copy-paste all the constituent images into GIMP and export them as PNG images: which is more than I could do with . . .
-
richmond62
- Livecode Opensource Backer

- Posts: 10529
- Joined: Fri Feb 19, 2010 10:17 am
Re: HyperStudio Stack Scope
These are the resources I extracted using HS Demo 5.2:
- - -
- - -
-
richmond62
- Livecode Opensource Backer

- Posts: 10529
- Joined: Fri Feb 19, 2010 10:17 am
-
richmond62
- Livecode Opensource Backer

- Posts: 10529
- Joined: Fri Feb 19, 2010 10:17 am
Re: HyperStudio Stack Scope
-
What was ungettable at was a Movie clip:
- -
Of a woman who kept popping out of the coffin looking for her shampoo.
SURELY a 'scope' thing is meant to be used to, among other things, extract components from a HyperStudio stack so one can reconstruct it in an xTalk IDE.
What was ungettable at was a Movie clip:
- -
Of a woman who kept popping out of the coffin looking for her shampoo.
SURELY a 'scope' thing is meant to be used to, among other things, extract components from a HyperStudio stack so one can reconstruct it in an xTalk IDE.
Re: HyperStudio Stack Scope
Hi Richmond,
When I circle back to HyperStudio Stack Scope for the Mac I will rev it to handle movies in the spirit of continuous product improvement. I moved on to HyperStudio Stack Scope for the Apple IIGS but for some reason it is giving me some trouble. Also started a SuperCard Stack Scope app.
I did expect these utilities would be of use by XTalk developers for various purposes.
- Mike
When I circle back to HyperStudio Stack Scope for the Mac I will rev it to handle movies in the spirit of continuous product improvement. I moved on to HyperStudio Stack Scope for the Apple IIGS but for some reason it is giving me some trouble. Also started a SuperCard Stack Scope app.
I did expect these utilities would be of use by XTalk developers for various purposes.
- Mike
-
richmond62
- Livecode Opensource Backer

- Posts: 10529
- Joined: Fri Feb 19, 2010 10:17 am
Re: HyperStudio Stack Scope
Well, not only should it extract movie and audio clips, it should also be able to identify and extract all images: as at the moment all that really happens is it shows screen shots of constituent cards.
-
richmond62
- Livecode Opensource Backer

- Posts: 10529
- Joined: Fri Feb 19, 2010 10:17 am
Re: HyperStudio Stack Scope
OK, back with HS Demo on MacOS 10.7, and I CAN copy a movie file: the problem is where to paste the thing. 
-
richmond62
- Livecode Opensource Backer

- Posts: 10529
- Joined: Fri Feb 19, 2010 10:17 am
Re: HyperStudio Stack Scope
If you change the SUFFIX of an HS stack from .stk or .stack to .zip you can simply extract ALL the resources including movie and audio clips.
- -
On MacOS 10.7 via the Terminal an unzip command was sufficient without changing the suffix.
- -
On MacOS 10.7 via the Terminal an unzip command was sufficient without changing the suffix.
-
PaulDaMacMan
- Posts: 694
- Joined: Wed Apr 24, 2013 4:53 pm
- Contact:
Re: HyperStudio Stack Scope
This is all very cool stuff Mike.
Thank you for building it! I particularly like the HyperCardIIGS parser. I never had an Apple II GS ( but some how I still own an Apple IIGS CRT monitor
)
Anyway, back in the day I never got to play with HC II GS. That is i until recently, running it in GSPlus emulator. I had trouble getting the multi-floppy installer to install the full thing, but I got enough installed that it's working any way.
I did have one minor problem with HC IIGS scope, it wouldn't maintain aspect ratio on the PNG images it would output from color icons in those stacks. But just the fact that it converts them to a modern image format is great! I can always correct the aspect ratio in an image editor.
Anyway this stuff you're doing is far more useful for people wanting to revive their old xTalk projects.
Thanks again.
Thank you for building it! I particularly like the HyperCardIIGS parser. I never had an Apple II GS ( but some how I still own an Apple IIGS CRT monitor
Anyway, back in the day I never got to play with HC II GS. That is i until recently, running it in GSPlus emulator. I had trouble getting the multi-floppy installer to install the full thing, but I got enough installed that it's working any way.
I did have one minor problem with HC IIGS scope, it wouldn't maintain aspect ratio on the PNG images it would output from color icons in those stacks. But just the fact that it converts them to a modern image format is great! I can always correct the aspect ratio in an image editor.
Anyway this stuff you're doing is far more useful for people wanting to revive their old xTalk projects.
Thanks again.
Re: HyperStudio Stack Scope
Thanks Paul,
I will look at the aspect ratio and make necessary corrections in the next revision. In working on these projects I am generally using both Claude and ChatGPT to assist but this week I tried something I came across when I read about decompile/recompile projects in the news.
I decided to decompile/recompile the first version of HyperCard and now after about a day I have a working HyperCard 1.2.5 clone that can run in the browser, create stacks and those stacks can be saved as .hqx archives and then opened in HyperCard 1.2.5 on a Mac emulator and they work fine. Did the same thing for the Apple IIGS version of HyperCard. Of course none of these can be posted for obvious copyright reasons but it is pretty fascinating and frankly a bit scary how far things have come so quickly.
- Mike
I will look at the aspect ratio and make necessary corrections in the next revision. In working on these projects I am generally using both Claude and ChatGPT to assist but this week I tried something I came across when I read about decompile/recompile projects in the news.
I decided to decompile/recompile the first version of HyperCard and now after about a day I have a working HyperCard 1.2.5 clone that can run in the browser, create stacks and those stacks can be saved as .hqx archives and then opened in HyperCard 1.2.5 on a Mac emulator and they work fine. Did the same thing for the Apple IIGS version of HyperCard. Of course none of these can be posted for obvious copyright reasons but it is pretty fascinating and frankly a bit scary how far things have come so quickly.
- Mike
-
PaulDaMacMan
- Posts: 694
- Joined: Wed Apr 24, 2013 4:53 pm
- Contact:
Re: HyperStudio Stack Scope
Yeah "ArtCraft", some amazing FOSS clones going on there... Clean Room built in Rust but feel like the apps I've used for decades, actually they feel significantly better (so far, and they're all in alpha stage still), not bloated, and there's Linux native builds!Hutchboy wrote: Sat Nov 07, 2026 4:55 am I decided to decompile/recompile the first version of HyperCard and now after about a day I have a working HyperCard 1.2.5 clone that can run in the browser, create stacks and those stacks can be saved as .hqx archives and then opened in HyperCard 1.2.5 on a Mac emulator and they work fine. Did the same thing for the Apple IIGS version of HyperCard. Of course none of these can be posted for obvious copyright reasons but it is pretty fascinating and frankly a bit scary how far things have come so quickly.
- Mike
I find it all both very exciting and quite concerning at the same time, but clearly this genie is never going back into the bottle.
I don't think you need to worry much about Apple lawyers knocking on you door over a HyperClone. Plenty of HyperCard clones around lately thanks to AI! I literally found three more, recently active HC clone projects just today! Heck, I don't even think Apple cares about AppleScript at this point.
Check out what the Java based HyperZebra is doing lately. That's going quite a few steps beyond HC clone. Not only is it like the HyperCard 3.x we never got, it can now handle calls to classic macOS Toolbox routines, and re-impliments QuickDraw 3D, OpenGL 1.2, etc. and does Just-In-Time recompiling 68k & PowerPC code, including XCMDs/XFCNs in resource forks! It's not emulating a whole classic macOS in a VM (like SheepShaver) though, it's instead becoming like a compatibility layer akin to WINE but for classic macOS thing instead of Win32. Brave New World.